![](https://subiecars.com/wp-content/uploads/2023/04/ascentforums_com_profile.png)
APPLICABILITY: 2020-22MY Legacy & Outback 2.4L Turbo 2019-22MY Ascent
SUBJECT: PCV hose design change / smell from engine area
The hose and clamps for the PCV assembly have been changed to address the owner’s complaints about the oil/gas smell.
For vehicles within the Basic New Car Limited California Performance and Emissions Warranty 5 years/50,000 miles, or the Federal Emissions Performance Warranty 2 years/24,000, this repair is covered under warranty.
Warranty – Short version:
- California cars: 5 years/50k miles
- All others: 3 years/36k miles.
TSB:
NOTE: The picture of the engine in the TSB is looking REAR SIDE/CVT engine, UNDER and BACK intercooler..
For do-it-yourselfers, you’ll need:
Hose Assembly-PCV 11815AC88D
New clamps are included with the new PCV hose assembly.
You will also need these for the intercooler.
GARDEN-INTER COOLER 21896AA130
AIR INTAKE GARDEN-HORSE 14497AA080
EDIT:
For those doing the PCV valve change, since you’re already there, you need this part number:
- 11810AA210 – PCV valve and both o-rings