I have a Subaru Outback 2008(all wheel drive)..I replaced my CV axles, tie rods and wheel bearings on the front end last fall. My driver side ball joint needed to be replaced so I replaced it I live in Wisconsin so it was hard to get out and also back in so now I’m experiencing violent shaking only during acceleration right after I replace the ball joint. I’ve experienced bad CV axles but this is way more violent at lesser speed. I expected the CV axles and they seem fine it’s only during the acceleration doesn’t matter if it’s a turn or not it starts right away from acceleration. It started exactly after I changed the ball joint so I’m assuming it’s not the drive shaft so didn’t expect it. Definitely coming from the front end. What could I have damaged to do this replacing the ball joint?
