Seat covers | Subaru Ascent Forum

Be prepared English, they are difficult to install and worth it,:cool: and beautiful. Fish for the straps, feed them under the seat above or below the bars and wiring, then do a test pull to make sure they don’t bind, friction is OK. Feed the bottom through the clamp correct then pull the middle latch firmly and make sure the seat moves freely. Then tighten them as tight as the seam will hold. For the back of the seat, the felt is inserted, then pulled up tight, then the back is pulled down and velcroed to it. I am making this sound easy as after 4 sets we are professional installers. First time though:mad:

Source link

We will be happy to hear your thoughts

Leave a reply