The parts for the front only need a pair of pliers and a thin screwdriver
Remove the 3 clips. You need to get new clips in the small parts bag so they can be set aside
remove the trim piece. I felt along the bottom edge and was pulled towards me. The door must be open. The green clip is sacrificial and will need to be removed. You can get your hand back there to wrap through the hole if you go from the plastic wheel well that you removed the 3 clips from step 1
There are 2 clips on the old part that need to be moved to the new part, this is step 5. I also lined up the new green clip so all three are pointing the same direction/angle. That was the only part I wasn’t sure about, but I think it’s correct. Hopefully someone will chime in if they think I got it wrong
I switched step 6 and 7 as I couldn’t figure out how to get the wheel well first without getting the lower mudguard first, so I completed step 7, then 6 and 8
