On my 2013 2.5cvt I have a rough idle (600-800rpm) while in stop or reverse or drive. If I turn on the current, it gets worse and can stall the engine. I have no check engine light. I replaced the valve and the PVC hose that was corroded. I cleaned the throttle body, MAF, EGR and intake. I tried the top engine cleaner through the vacuum line after the throttle, then removing the top half of the intake and cleaning the butterfly valves myself. Candles are about 30,000 years old. The o2 sensors and the cat are less than a year old. The alternator charges at 14 and the battery is at 12.5 with the engine off. The car runs fine at driving speeds but I have noticed sometimes when accelerating from a stop it doesn’t seem to accelerate as fast as it should.
